|
We offer several bonding agents for ceramic installations. Our proprietary formulas were developed specifically for the adhesion of ceramic tiles supplied in various sizes and shapes.
We offer a superior trowel grade epoxy labeled CLS-773, which is an anti-solvent, moisture insensitive, 100% solids epoxy resin. Our estimated coverage is approximately 20 sq. ft. of ceramic tile per kit with a mix ration of 1:1.
Our RTV 100% silicone adhesive, CLS-111 (white) and CLS-444 (high temperature red) is a gel-like, one component material that cures to a tough, rubbery solid excellent for for installing ceramic tiles, bonding gaskets, filling joints in ductwork and equipment housings or anywhere a tight, leakproof seal is required. Conveniently packaged in 10.3 ounce caulking tube.
Surface Preparation
-
Surface must be free of laitance, grease, oil, and any other contaminants that would inhibit a secure bond
-
Sandblasting or wirebrushing is strongly recommended for all surfaces
Mixing Epoxies
- Combine one (1) part by volume of Component "A" with one (1) part by volume of Component "B". The blend must be thoroughly mixed for at least 3 minutes with a trowel or slow speed drill and mixing paddle for best results
|
